Description
Precision‑engineered 095000‑7760 injector matching Denso specifications. Direct fit for Toyota 2KD‑FTV engines in Hilux, Fortuner, Innova, and Hiace. Restores power, fuel economy, and Euro IV emission compliance.
Overview
The 095000‑7760 injector is a service‑grade fuel injection component built to the exact dimensional, electrical, and hydraulic standards of the original Denso unit. It is specifically calibrated for Toyota’s 2.5L 2KD‑FTV common‑rail diesel engine, commonly found in light commercial vehicles, SUVs, and vans across Asia, Australia, and the Middle East. Each injector is flow‑matched and bench‑tested to deliver reliable starting, smooth idling, and reduced smoke under all load conditions.
Structural & Performance Features
Denso‑identical form factor – Same mounting footprint, connector orientation, and pipe connection as OEM part 095000‑7760 / 095000‑7761.
SAC (Seat‑at‑Center) nozzle with a multi‑hole orifice (typically 8 holes) that produces a fine, symmetrical spray pattern for optimal combustion.
High‑speed solenoid actuator – Response time ≤ 0.2 ms, ensuring precise injection timing control.
Maximum rail pressure – Rated for 1,800 bar (180 MPa), matching the 2KD‑FTV’s HP4 pump.
Integrated inlet filter (30 µm) protects the internal plunger from contaminants.
Supplied with new copper sealing washers and Viton® O‑rings for a leak‑proof installation.
Pre‑tested flow tolerance of ±2.5% across the set, minimising cylinder‑to‑cylinder variation.
Compatibility & Vehicle Fitment
This injector is a direct swap for the original Denso 095000‑7760 / 7761 in the following Toyota models (2KD‑FTV engine, 2.5L turbo‑diesel):
| Toyota Model | Chassis / Code | Production Years |
|---|
| Hilux (AN10 / AN20) | 2KD‑FTV | 2005 – 2015 |
| Fortuner (AN50 / AN60) | 2KD‑FTV | 2005 – 2015 |
| Innova (AN40) | 2KD‑FTV | 2005 – 2015 |
| Hiace (H200 series) | 2KD‑FTV | 2005 – 2013 |
| Dyna / ToyoAce (light truck) | 2KD‑FTV | 2005 – 2010 |
Why Choose This Injector?
Up to 60% cost saving vs. dealer pricing.
12‑month / 80,000 km warranty against defects.
Emissions‑ready – meets Euro 4 / Euro 5 limits when installed as a full set.
Extensive quality control – each unit is spray‑tested on a Hartridge CRS bench.
